Categories: Other | May 31st, 2008 | by Admin | no comments
How to Measure for Blind INstallation
12. Measurements
For agency installation of Venetian window coverings, please follow the guidelines listed in paragraph 13 for taking measurements.
If installation is to be performed by the agency, measurements should be taken by the agency. It should not be necessary to have a contractor take measurements.
Categories: Other | May 30th, 2008 | by Admin | no comments
Mini Blind Color Selection
Colors will be chosen from standard color selection (minimum 25) and alabaster must be available.window treatments are to be delivered within 21 days ARP (less holidays). Orders are not to be held to meet a minimum order quantity. Orders of ten (10) or more window coverings will be charged at one price and orders of nine (9) or less will be charged at separate price.No additional charge for hold downs for door installation.
Categories: Other | May 29th, 2008 | by Admin | no comments
Mini Blind Contract Responsiblities
It is the responsibility of the contractor to call on any state agency, institution, public school, university, or participating non-state agency to discuss requirements and upon written request, take and guarantee measurements. Contractor is obligated to respond to such requests. Contractors responding to telephone requests for measurements will do so at their own risk. The State will not be responsible for misunderstandings resulting from oral requests.
Categories: Other | May 28th, 2008 | by Admin | no comments
THANK YOU LETTERS AND NOTES
“Thank you” is a powerful statement that is seldom heard. Every thank you is an opportunity to sell your qualifications and to leave a fresh impression in the mind of the reader. Send a cover letter or note to employers and employment contacts whenever they have extended themselves in any way on behalf of your job search. At the minimum, a written thank you should be sent after all interviews.
Categories: Other | May 27th, 2008 | by Admin | no comments
What to do if Circumstances prevent Delivery?
If circumstances beyond the control of the contractor result in a late delivery and installation, it is the responsibility and obligation of the contractor to make the details known immediately to the contract administrator.
Term Contract No. 870A
Categories: Other | May 26th, 2008 | by Admin | no comments
Basic Parts of a Thank Youe
* Statement of appreciation for the interview.
* Expression of interest in employment with a cover letter.
* Brief restatement of qualifications.
* Final “Thank You.”
* Date and time you’ll follow-up.
Categories: Other | May 25th, 2008 | by Admin | no comments
Window discount blinds Heat Reducing Capacity
Window window blindsvertical or horizontal slat-typeare more effective at reducing summer heat gain than winter heat loss.Because of the numerous openings between the slats, it’s difficult to control heat loss through interior window custom blinds, but the slats offer flexibility in the summer. Unlike shades, you can adjust the slats to control light and ventilation. For example, when completely closed and lowered on a sunny window, highly reflective discount blinds can reduce heat gain by around 45%. They can also be adjusted to block and reflect direct sunlight onto a light-colored ceiling. A light-colored ceiling will diffuse the light without much heat or glare.
Categories: Other | May 24th, 2008 | by Admin | no comments
Window Treatment Inovations Funding
Among the projects selected for funding are:
Advanced Processing Technology of Electrochromic Windows: A process to develop new film patterning techniques for energy-saving smart windows. The process improves visible light transmission and reduces glare, while retaining a clear view and increasing thermal comfort. Also, encouraging innovation with window discount blinds and shades to help increase energy savings.
An Indirect Route for Ethanol Production: A process to develop fuel ethanol from renewable resources to achieve savings of 80 percent in energy consumption. The process helps U.S. farmers create a market for corn supplies and increases national energy security.
Manufacturing Ceramic Products from Fiberglass Waste: A low-cost energy method of completely transforming fiberglass waste into a dense ceramic product that can be used for window window blinds, shades, as well as other uses. The process could eliminate the need for disposal of 260,000 tons of fiberglass waste annually.
Near-Infrared (NIR) Veneer Strength Sensor for Forest Industry: Use of NIR sensors instead of ultra-sonic technology allows testing for veneer wood strength before drying. The NIR technology will improve process efficiency and reduce product waste, and is expected to save about $23,000 annually in energy costs.
The Force Modulator: A durable sheet metal technology for the steel industry that allows proper control of press forces during part forming.
Categories: Other | May 23rd, 2008 | by Admin | no comments
Government Seeking Window Blind Inovation
“25 percent of the energy used to heat and cool buildings goes right out the window,” Secretary of Energy Spencer Abraham said. “The innovative technologies receiving funding today will improve U.S. industrial competitiveness while reducing energy use, helping to make our nation more secure.” Existing window treatments and shades can be improved to help reduce energy costs.
The Energy Department selected 19 organizations out of 202 proposals to receive funding as part of two DOE programs: Inventions and Innovation (I&I), and the National Industrial Competitiveness through Energy, Environment and Economics (NICE3) initiative.
Categories: Other | May 22nd, 2008 | by Admin | no comments
Window Blind Blogs
Update: We are starting some new forums, blogs and sites, We are considering opening a Open Source Forums at Adison U, any feedback on the idea of doing this and your comments on if you would participate are welcome. We also have opened a Ecology Directory a technology forum. Any feedback on our sites will help.
Categories: Other | May 21st, 2008 | by Admin | no comments
The Effective Job Seeker
The effective job seeker will not send the same resume for each new job opportunity. Resumes need to be tailored for each position. Likewise, the same cover letter cannot be used in every situation. It also must be customized for each opportunity. There are a variety of cover letter formats, some of which are described below. Whatever format you use, be sure the letter conforms to acceptable standards for business letters.
Categories: Other | May 20th, 2008 | by Admin | no comments
How to Take Mini Blind Measurements
In order to perform field measurements for venetian discount blinds, first you have to determine whether the window blinds are to be mounted inside or outside the window. Please specify which method of installation will be required. If an inside mount is required, the width of the window should be measured at the top, the middle, and the bottom, with the smallest measurement being the measurement recorded. The length of the window should be taken on the left and on the right sides, with the longest measurement being the measurement recorded. The manufacturer will take the necessary deductions.
Categories: Other | May 19th, 2008 | by Admin | no comments
Invoicing for Mini Blind Installation
The contractor shall invoice at the actual installation cost of the discount blinds, per location.The minimum installation charge shall apply only in cases where the installation cost of the window blinds exceeds the minimum installation charge.
*Location is defined as one or more buildings within close proximity to one another requiring installation service. The minimum installation charge is not intended to apply to each building at a single location. When installation can be completed at more than one building, and it is not necessary for the installers equipment to be transported by vehicle between the installation sites, only one minimum installation charge should be applied.
Categories: Other | May 18th, 2008 | by Admin | no comments
New Venetian Blind Created
RADIANCE is description of a set of new venetian window treatments. The depth of the window coverings (X dimension) is given first, followed by the width (Y dimension), followed by the height (Z dimension). The number of slats to place evenly within this height is given as nslats. The angle of the blind, where zero is perfectly horizontal and a positive angle tilts the positive X edge upwards, is given in degrees. The window treatments are initially situated so that the corner of the bottom blind isheight/nslats/2 above the XY plane, and all coordinates are positive.Each new slat is placed height/nslats above the previous one, until the top slat is at height - height/nslats/2 . The window coverings may of course be moved from this starting point with the xform(1) command.
Categories: Other | May 17th, 2008 | by Admin | no comments
Resume Guildlines
This article provides some guidelines for creating resume and cover letters that will help you pass the 30- second test and win interviews. The first section, on resumes, describes what information they should contain, how to highlight your skills for the job you want, types of resumes, and formatting resumes for easy reading and computer scanning. The next section discusses the four parts of acover letter salutation, opening, body, and closing. A final section offers suggestions for finding out more about resumes andcover letters.
#TITLE# Famos Field Trial labs for sale
Categories: Other | May 16th, 2008 | by Admin | no comments
Energy Efficiency Funding
For more than 20 years, DOE’s I&I program has funded more than 500 energy efficient inventions with nearly 25 percent of them reaching the marketplace. Cumulative sales for those products total nearly $710 million.
DOE’s NICE3 program provides funding to state and industry partnerships (large and small business) for projects that demonstrate advances in energy efficiency and clean production technologies like advanced window blind and window shade systems. State and industry partnerships are eligible to receive a one-time grant of up to $525,000. The industrial partner may receive a maximum of $500,000 in federal funding. The non-federal cost share must be at least 50 percent of the total cost of the project.
Categories: Other | May 15th, 2008 | by Admin | no comments
Faux Wood Wide Selection of Sizes
Fauz wood window coverings are a beautiful addition to any home. Not only are Faux Wood window treatments attractive, they can help reduce your heating and air conditioning bills. If you are looking for a change of pace Faux Wood window coverings can give your home or apartment that designer look and feel.
Basic Blind 23×64 Faux Wood - Natural
Basic Blind 27×64 Faux Wood - Natural
Basic Blind 29×64 Faux Wood - Natural
Basic Blind 30×64 Faux Wood - Natural
Basic Blind 31×64 Faux Wood - Natural
Basic Blind 32×64 Faux Wood - Natural
Basic Blind 34×64 Faux Wood - Natural
Basic Blind 35×64 Faux Wood - Natural
Basic Blind 36×64 Faux Wood - Natural
Basic Blind 34×72 Faux Wood - Natural
Basic Blind 35×72 Faux Wood - Natural
Faux wood window treatments are offered at a number of commercial stores. Many stores offer installation services, but of course you can install them yourself! Look around, there are many attractive deals and discounts available, especially if you are planning on installing faux wood window coverings throughout your home!
Categories: Other | May 14th, 2008 | by Admin | no comments
Window Blind Blogs
Update: We are starting some new forums, blogs and sites, We are considering opening a Open Source Forums at Adison U, any feedback on the idea of doing this and your comments on if you would participate are welcome. We also have opened a Ecology Directory a technology forum. Any feedback on our sites will help.
Categories: Other | May 13th, 2008 | by Admin | no comments
One Inch Mini Blind Contract
This contract is established to furnish One Inch Mini custom blinds on a periodic basis during the period designated. The contract may be renewed by written agreement of the parties under the same prices, terms and conditions for additional twelve (12)month periods but not beyond December 31, 2007.
Approximately 200 discount blinds will be purchased during the contract period. Sizes will range from 17 x 142 wide and 24 to 126 long. Lift cord and wand placement (left or right) to be available. The customer (KUMC) shall perform their own blind installation.
Categories: Other | May 12th, 2008 | by Admin | no comments
Referral
Use the referral format to contact employers to whom you’ve been referred. The effective job seeker will receive referrals to many job opportunities through networking and informational interviews. The referral may be to a specific job opening (advertised or unadvertised) or to an employer who may not be hiring. In a cover letter the individual who provided the referral is mentioned in the letter.
Categories: Other | May 11th, 2008 | by Admin | no comments
Curved Window window blinds
If curved custom blinds are desired, a radius of curvature may be given with the +/-r option. If given as +r, The curvature is upward (which is the usual configuration). If the option is given as -r, then the curvature is downward. The radius indicates how far from each slat its effective cylindrical center resides. Each slat will be broken into as many polygons as is necessary to keep the delta changes in angle less than 10 degrees. (Note that this may result in a rather large number of polygons.)
Categories: Other | May 10th, 2008 | by Admin | no comments
Cleaning up after Mini Blind Installations
Upon completion of installation, vendor shall clean up and dispose of all debris occasioned by his work. All debris is to be removed from premises and rooms shall be left broom clean. If existing custom blinds are removed, disposal of such should be at the direction of the using agency and if desired, the responsibility of the contractor. Disposal of discount blinds may be off-premises, at the direction of the user.
14.B. Labels
All window blinds sold under this contract shall be labeled inside the headrail with CONTRACTORS name and date of shipment. If the contractor installs custom blinds, the date of installation must be shown in place of the shipment date. Failure to identify discount blinds will result in rejection by Quality Assurance Inspectors and invoices will not be released until such omission is corrected.
15. Quality Acceptance Inspection
Installations in excess of $2500.00 are required to have a Quality Assurance Inspection.
Categories: Other | May 9th, 2008 | by Admin | no comments
What is a Mini Blind?
The long horizontal slats are held one above the other by the rungs of ladder cords shaped like a ladder. The lower ends of the legs of the ladder cords are secured to the long rail under the slats. Their upper ends are attached to the drive rod in the housing, the elongated box above the slats. As the drive rod rotates, one leg of each ladder cord moves up while the other moves down, causing the angle of the slats to change. In one design, this rotation is achieved by pushing up or pulling down on a long handle called a tilt wand connected to the drive rod by a lever. Lift cords along the ladder cords are also attached to the rail. They pass through holes in the slats and into the housing above, where they go over pulleys, combine and exit through the cord lock. For safety it’s important that the lock always work. A downward pull on the main lift cord raises the slats by the cords pulling up the rail below the slats. The cord lock holds the main lift cord to keep the slats up until the cord is pulled to release the lock. The safety lock made the cord lock easier to use.
Categories: Other | May 8th, 2008 | by Admin | no comments
Style It!
The paper and style of your cover letter should compliment your resume. You might consider using the same paper stock for both your cover letter and resume.
Categories: Other | May 7th, 2008 | by Admin | no comments
Blind Measuring Requirements
In situations where the contractor will be installing window treatments and the agency needs assistance in performing measurements, it is the obligation of the contractor to take on-site measurements. Requests for on-site measurements should be forwarded to the contractor in writing, with the using agencys purchase order number, to be confirmed once the actual measurements are complete and the estimate finalized. A purchase order should result in all instances, unless the estimate exceeds budgetary allowances. Any abuse of this service by agencies should be reported to the contract administrator.
All requests for measurements should be made in written form by the using agency. The State will not be responsible for and misunderstandings that results from oral requests.
Categories: Other | May 6th, 2008 | by Admin | no comments
History of the Mini Blind
A mini blind (mini-blind, miniblind) is a type of non-vertical window blind made of long, narrow slats held together by string and located inside the window. Its slats are not as wide as venetian blind slats.2 A mini blind has more slats than a regular Venetian blind because its slats are narrow. The slats of mini discount blinds are less than half the width of regular Venetian window blinds. The slats are opened and closed by rotating a rod or by directly pulling a string. They are raised and lowered by pulling other strings.
custom blinds made of narrow, light-weight horizontal wood slats, adjustable to admit or exclude light, were developed in 1794, and called Venetian discount blinds. The window blinds were often used instead of window curtains or shutters. In the 1840s, these custom blinds were held together by flat strips of cloth instead of by cords perhaps to shade the lift holes and like today they came in various colors.4 In 1966, a new pulley system was invented which afforded great improvement in the control mechanism. 5 Over time, narrower slats became more common, as they were easier to clean and they reduced glare at certain settings and their appearance was pleasing to many. In 1946 Henry Sonnenberg and Joe Hunter developed technology and equipment for the production of lightweight aluminum slats (50 mm) for Venetian discount blinds, and by 1979, 25 mm slats were popular.6
#TITLE# Mini Blind Order Definition
Categories: Other | May 5th, 2008 | by Admin | no comments
Use the invited format whenever an employer has asked for a cover letter. This is often in response to a classified ad or publicized job listing. This style focuses on matching your qualifications to the advertised requirements of the position.
Cover Letter Formats">Read Full Post »
Categories: Other | May 4th, 2008 | by Admin | no comments
Window Treatment Inovations Funding
Among the projects selected for funding are:
Advanced Processing Technology of Electrochromic Windows: A process to develop new film patterning techniques for energy-saving smart windows. The process improves visible light transmission and reduces glare, while retaining a clear view and increasing thermal comfort. Also, encouraging innovation with window window coverings and shades to help increase energy savings.
An Indirect Route for Ethanol Production: A process to develop fuel ethanol from renewable resources to achieve savings of 80 percent in energy consumption. The process helps U.S. farmers create a market for corn supplies and increases national energy security.
Manufacturing Ceramic Products from Fiberglass Waste: A low-cost energy method of completely transforming fiberglass waste into a dense ceramic product that can be used for window window treatments, shades, as well as other uses. The process could eliminate the need for disposal of 260,000 tons of fiberglass waste annually.
Near-Infrared (NIR) Veneer Strength Sensor for Forest Industry: Use of NIR sensors instead of ultra-sonic technology allows testing for veneer wood strength before drying. The NIR technology will improve process efficiency and reduce product waste, and is expected to save about $23,000 annually in energy costs.
The Force Modulator: A durable sheet metal technology for the steel industry that allows proper control of press forces during part forming.
Categories: Other | May 3rd, 2008 | by Admin | no comments
Mini Blind Installation Documentation
The contractor(s) shall provide a copy of all invoices and over per location and a copy of the floor layout to show room numbers and the number of windows with installation.
Invoices shall indicate:
a) Type of window coverings
b)Number of window treatments at each size
c)Square footage of each blind
d)Total number of window coverings
e)Total square footage
f)Quantity Discounts
g)Itemized Additional Charges
h)Installation Charge
i)Total Price
Such invoices shall be forwarded to the attention of
Quality Assurance Inspection.Invoices shall be sent on accumulative monthly basis.Failure of the contractor to comply with this requirement may result in the removal of the contractor from the contract.Upon acceptance by quality assurance inspection to determine compliance with specifications, terms and conditions of this contract, approval for payment of this invoice will be forwarded to the using agency.INVOICES WILL NOT BE PAID BY THE USING AGENCY UNTIL QUALITY ACCEPTANCE HAS BEEN APPROVED.
Categories: Other | May 2nd, 2008 | by Admin | no comments
Blind Shading Systems Delivery Timing
Contract Shading Systems will complete delivery within 15 to 30 days after receipt of order.In the event the delivery is not received within the contract delivery period, the contractor may be held in default in accordance with paragraph 1, DEFAULT AND PERFORMANCE BOND in the North Carolina General Contract Terms and Conditions, and the state may procure the articles or services from other sources and hold the contractor responsible for excess cost occasioned thereby. It is important that agencies make the contract administrator aware of delivery problems.
Categories: Other | May 1st, 2008 | by Admin | no comments
Mini Blind Contract Responsiblities
It is the responsibility of the contractor to call on any state agency, institution, public school, university, or participating non-state agency to discuss requirements and upon written request, take and guarantee measurements. Contractor is obligated to respond to such requests. Contractors responding to telephone requests for measurements will do so at their own risk. The State will not be responsible for misunderstandings resulting from oral requests.